Description
The GEL PEAKE cricket shoe is built for hard wicket cricket. This is a no fuss cricket shoe constructed using a single density midsole and a dimpled rubber outsole to deliver excellent grip during play. It includes both rear and forefoot GEL cushioning to help absorb shock when playing on hard surfaces, and the trustic system provides added support.
- Synthetic upper with reinforced toe to provide increased durability from toe drag
- Internal support panel for increased side stability
- Internal rearfoot Gel with heel counter
- Amplifoam midsole
- No sew film provides increased comfort
- Dimpled rubber, carry over outsole provides increased flexibility while maximising durability
Please Note: This product is only available for orders within Australia.
All top coaches will agree that having the correct size equipment is crucial especially for junior players.
Bat Sizing (Using Players Height):
PLEASE NOTE - BAT SIZES ARE AN APPROXIMATION ONLY
Full Size /Short Handle - 1.75m & over
Small Adult/Academy - 1.68m - 1.75m
Harrow - 1.63m - 1.68m
6 - 1.57m - 1.63m
5 - 1.50m - 1.57m
4 - 1.44m - 1.5m
3 - 1.37m - 1.44m
2 - 1.29m - 1.37m
1 - 1.22m - 1.29m
0 - 1.10m - 1.22m
00 - Up to 1.10m
Too often junior players use bats that are too big for them. Bats that are too long prevent the bat being picked up correctly as the top of the handle gets in the way.
Gloves Sizing:
PLEASE NOTE - GLOVE SIZES ARE AN APPROXIMATION ONLY
6-8 Years - XS Junior
8-10 Years - Small Junior
10-12 Years - Junior
12-14 Years - Youths
15 Years and Above - Medium or Adult
It is important that gloves have a nice snug fit. If they are too loose the palm will bunch up and cause discomfort and they will wear out prematurely. With gloves it is acceptable to allow up to 10mm (1cm) of extra room at the end of the fingers.
Pads Sizing:
PLEASE NOTE - PAD SIZES ARE AN APPROXIMATION ONLY
Using Players Height -
120-135cm - XS Junior
130-145cm - Small Junior
140-155cm - Junior
150-165cm - Youths
170cm + - Medium or Adult
Pads are probably the most difficult to fit correctly. There is only limited room for error, and pads need to be fitted correctly to allow for a good amount of movement - There's nothing worse than being caught short on a quick single!! Ideally your knee should be centered in the knee roll and the "top hat" should not get in the way when playing your shots - particularly front foot shots.
Helmet Sizing:
With so many different brands of helmets available, it is important to check the circumference measurements within the different brand and helmets styles. To select the correct size, measure the circumference around the cap line (where a cap would sit). Most of our listed helmets will have a cm measurement guide to follow.
Clothing Sizes Guide:
Estimate shipping